Cisco Systems OL-7396-01 Manual De Usuario
14-25
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 14
Configuring LAN Emulation
LANE Configuration Examples
Displaying the LANE Client Configuration on the ATM switch
The following example shows the show lane client command display for the Ethernet LANE client in
the ATM switch:
the ATM switch:
ATM_Switch# show lane client
LE Client ATM13/0/0.1 ELAN name: eng Admin: up State: operational
Client ID: 3 LEC up for 4 minutes 58 seconds
Join Attempt: 1
HW Address: 0060.3e7b.2002 Type: ethernet Max Frame Size: 1516
ATM Address: 47.00918100000000603E7B2001.00603E7B2002.01
VCD rxFrames txFrames Type ATM Address
0 0 0 configure 47.00918100000000603E7B2001.00000C407575.00
52 1 4 direct 47.00918100000000603E7B2001.00000C407573.01
53 9 0 distribute 47.00918100000000603E7B2001.00000C407573.01
54 0 13 send 47.00918100000000603E7B2001.00000C407574.01
55 19 0 forward 47.00918100000000603E7B2001.00000C407574.01
56 11 10 data 47.00918100000000603E7B2001.00000C407572.01
57 6 5 data 47.00918100000000603E7B2001.00000C407C02.02
The following example shows the show lane client command display for the Token Ring LANE client
in the ATM switch router:
in the ATM switch router:
ATM_Switch# show lane client
LE Client ATM13/0/0.1 ELAN name: eng Admin: up State: operational
Client ID: 3 LEC up for 4 minutes 58 seconds
Join Attempt: 1
HW Address: 0060.3e7b.2002 Type: token ring Max Frame Size: 4544
ATM Address: 47.00918100000000603E7B2001.00603E7B2002.01
VCD rxFrames txFrames Type ATM Address
0 0 0 configure 47.00918100000000603E7B2001.00000C407575.00
52 1 4 direct 47.00918100000000603E7B2001.00000C407573.01
53 9 0 distribute 47.00918100000000603E7B2001.00000C407573.01
54 0 13 send 47.00918100000000603E7B2001.00000C407574.01
55 19 0 forward 47.00918100000000603E7B2001.00000C407574.01
56 11 10 data 47.00918100000000603E7B2001.00000C407572.01
57 6 5 data 47.00918100000000603E7B2001.00000C407C02.02
Default Configuration for a Single Emulated LAN with Backup LECS and LES on
the ATM Switch Router
the ATM Switch Router
The following examples show how to configure two Cisco 4500 routers and one ATM switch router for
one emulated LAN with fault tolerance. Configurations for both Ethernet and Token Ring emulated
LANs are shown.
one emulated LAN with fault tolerance. Configurations for both Ethernet and Token Ring emulated
LANs are shown.
Router 1 contains the LECS, LES, BUS, and an LEC. Router 2 contains only an LEC. The ATM switch
router contains the backup LECS and the backup LES for this emulated LAN, along with another LEC
(see
router contains the backup LECS and the backup LES for this emulated LAN, along with another LEC
(see
).