Cisco Systems OL-7396-01 Manual De Usuario
2-14
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 2
Understanding the User Interface
Accessing Each Command Mode
To exit ATM accounting selection configuration mode and return to privileged EXEC mode, use the end
command or press Ctrl-Z:
command or press Ctrl-Z:
Switch(config-acct-sel)# end
Switch#
For detailed information on configuring ATM accounting selections, see
LANE Configuration Server Database Configuration Mode
LAN emulation (LANE) configuration server database configuration mode provides access to
commands used to define the LANE configuration server database.
commands used to define the LANE configuration server database.
To enter LANE configuration server database configuration mode from global configuration mode, use
the lane database command and specify a database name; the prompt changes to the ATM switch
router’s hostname followed by (lane-config-database)#:
the lane database command and specify a database name; the prompt changes to the ATM switch
router’s hostname followed by (lane-config-database)#:
Switch(config)# lane database lecsdb
Switch(lane-config-database)#
To exit LANE configuration server database configuration mode and return to global configuration
mode, use the exit command:
mode, use the exit command:
Switch(lane-config-database)# exit
Switch(config)#
To exit LANE configuration server database configuration mode and return to privileged EXEC mode,
use the end command or press Ctrl-Z:
use the end command or press Ctrl-Z:
Switch(lane-config-database)# end
Switch#
For detailed information on configuring the LAN emulation configuration server database, see
ATM E.164 Translation Table Configuration Mode
ATM E.164 translation table configuration mode provides access to commands used to configure the
translation table that maps native E.164 format addresses to ATM end system (AESA) format addresses.
translation table that maps native E.164 format addresses to ATM end system (AESA) format addresses.
To enter ATM E.164 translation table configuration mode from global configuration mode, use the
atm e164 translation-table command; the prompt changes to the ATM switch router’s hostname
followed by (config-atm-e164)#:
atm e164 translation-table command; the prompt changes to the ATM switch router’s hostname
followed by (config-atm-e164)#:
Switch(config)# atm e164 translation-table
Switch(config-atm-e164)
To exit ATM E.164 translation table configuration mode and return to global configuration mode, use
the exit command:
the exit command:
Switch(config-atm-e164)# exit
Switch(config)#