Cisco Systems OL-7396-01 Manual De Usuario

The following is an example of how to configure rate limiting on your switch router:

Router# configure terminal

Enter configuration commands, one per line. End with CNTL/Z

Router(config)# interface f0/0/0

Router(config-if)# traffic-shape rate 1000000 20000

Router(config-if)# exit

To display the rate limiting and traffic shaping configurations, enter the following commands in 
Privileged EXEC mode:

The following is an example of how to display the port configuration on your switch router:

Router# show epc port-qos

Interface Type Input/ Target-Rate Burst-Size

Output (bits/sec) (bytes)

---------------------------------------------------------------------

FastEthernet0/0/0 Rate-Limit Input 1000000 20000

Rate-Limit Output 100000 30000

The following is an example of how to display the QoS configuration on your switch router:

Router# show epc port-qos

Interface            Type            Input/ Target-Rate    Burst-Size

                                     Output  (bits/sec)       (bytes)

---------------------------------------------------------------------

FastEthernet9/0/3    Rate-Limit      Input     10000000         64000

                     Rate-Limit      Output    10000000         64000

The following is an example of how to display the port QoS input parameters for an interface:

Router# show epc port-qos interface f9/0/3 in

Input Port QoS Parameters:

Current number of tokens                    (tokens):  65352

Configured burst size                    (burstsize):  65352

Token update interval (ticks)                (time1):   7789

Tokens added per interval          (tokens_in_time1):   1556

Time to fill bucket (ticks)     (time_to_fill_burst): 327138

Displays the port configurations.

Displays the QoS configuration.

show epc port-qos interface 
card/subcard/port out

Displays the output for port QoS parameters for a particular 
interface.