Cisco Systems 2.5 Manual De Usuario
Chapter 2 Fault Descriptions
WLSE Fault
2-20
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
WLSE Fault
AAA Server Faults
Table 2-2
WLSE Fault
Fault Description
Explanation
Related Setting
Recommended Action
Dot11mib view is
not enabled on
some Access
Points. Please
consult online help
for details
not enabled on
some Access
Points. Please
consult online help
for details
The device is not configured
with the iso (dot11 mib) view,
and cannot be managed
effectively by the WLSE.
with the iso (dot11 mib) view,
and cannot be managed
effectively by the WLSE.
This can cause some WLSE
report information to be missing
and some WLSE faults may not
be generated.
report information to be missing
and some WLSE faults may not
be generated.
When this fault has been cleared,
the following message displays:
No Dot11mib view
misconfigurations detected.
the following message displays:
No Dot11mib view
misconfigurations detected.
Manage Fault
Settings >
Thresholds >
WLSE >
Dot11mib view
enabled
Settings >
Thresholds >
WLSE >
Dot11mib view
enabled
Configure the devices and
the WLSE as described in
the WLSE as described in
.
Table 2-3
Server Faults
Fault Description
Server
Type
Type
Explanation
Related Setting
Recommended Action
Authentication
failed. Please
check EAP-MD5,
LEAP, PEAP, or
RADIUS
credentials
failed. Please
check EAP-MD5,
LEAP, PEAP, or
RADIUS
credentials
EAP-MD5
The server is
reachable but the
credentials are
incorrect.
reachable but the
credentials are
incorrect.
When this fault has
been cleared, the
following message
displays:
Authentication
succeeded
been cleared, the
following message
displays:
Authentication
succeeded
Manage Fault
Settings >
Thresholds >
EAP-MD5 /LEAP/
PEAP/RADIUS>
Response Time
Settings >
Thresholds >
EAP-MD5 /LEAP/
PEAP/RADIUS>
Response Time
Make sure that the
credentials are set
correctly by selecting
Devices > Discover >
AAA Server.
credentials are set
correctly by selecting
Devices > Discover >
AAA Server.