Cisco Systems OL-8241-02 Manual De Usuario

To define a static ARP mapping, use the arp command. The syntax for this global 
configuration mode command is:

arp ip_or_host mac_address interface {vlan}

The variables and options are as follows:

ip_or_host - The IP address of the system for static mapping. Enter an IP 
address in dotted-decimal notation (for example, 192.168.11.1) or in 
mnemonic host-name format (for example, myhost.mydomain.com).

mac_address - The MAC address of the system mapped to the IP address. 
Enter the MAC address in hyphenated-hexadecimal notation (for example, 
00-60-97-d5-26-ab).

interface - The CSS Ethernet interface port that you want to configure. For a 
CSS 11501, enter the interface name in interface port format (for example, 
e2). For a CSS 11503 or CSS 11506, the interface format is slot/port (for 
example, 3/1). 

vlan - The number of the VLAN configured in a trunked interface on which 
the ARP address is configured (assuming trunking is enabled for the CSS 
Gigabit Interface port). Enter an integer from 1 to 4094 as the VLAN number. 

For example:

(config)# arp 192.168.11.1 00-60-97-d5-26-ab e2

To remove a static mapping address, use the no arp command. For example:

(config)# no arp 192.168.11.1