Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco Systems
  4. 1000 Series
  5. Manual De Usuario

Cisco Systems 1000 Series Manual De Usuario

Descargar
Página de 702
 
5-50
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 5      Software Upgrade Processes Supported by Cisco ASR 1000 Series Routers
  ISSU Upgrade for Redundant Platforms
Step 9
request platform software package install rp
 
standby-RP
 file 
target-standbyRP-URL-for-sub-packages
:asr1000rp*
version
*.pkg
 force
Example:
Router# request platform software package 
install rp 1 file 
stby-bootflash:asr1000rp*03.13.00.S.154-3.S-ext
*.pkg force
Upgrades the RP subpackages on the standby RP, where the 
“rp*” wildcard is specified to capture all of the RP 
subpackages for the desired upgrade release.
Step 10
hw-module slot
 
standby-RP
 reload
Example:
Router# hw-module slot R1 reload
Reloads the standby RP.
Step 11
request platform software package install rp
 
active-RP
 file 
URL-to-active-file-system
:asr1000rp2-{sipbase,sip
spa}*
version
*.pkg slot
 SIP-slot-number 
force
Example:
Router# request platform software package 
install rp 0 file 
bootflash:asr1000rp2-{sipbase,sipspa}*03.13.00.
S.154-3.S-ext*.pkg slot 2 force
Upgrades the SIP and SPA subpackages for each SIP on the 
router.
Note
This step must be completed one SIP at a time, and 
repeated for each SIP installed on the router before 
performing the next step.
Tip
You can use the show ip interface brief command 
to identify which slots contain SIPs and SPAs. The 
interfaces with three numbers (in the form 
SIP-number/SPA-number/interface-number) 
identify the SIP and SPA locations in the router.
Note
The pattern options used in this CLI (sipbase and 
sipspa) were introduced in Cisco IOS XE Release 
2.1.2 and are not available in previous Cisco IOS 
XE Releases.
See the 
 for pre-Cisco 
IOS XE Release 2.1.2 ISSU upgrade procedures.
Command or Action
Purpose