Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco Systems
  4. 1000 Series
  5. Manual De Usuario

Cisco Systems 1000 Series Manual De Usuario

Descargar
Página de 702
 
3-3
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 3      
  Configuring a Console Port Transport Map
Configuring a Console Port Transport Map
This task describes how to configure a transport map for a console port interface on the Cisco ASR 1000 
Series Router.
SUMMARY STEPS
1.
(Required) enable
2.
(Required) configure terminal
3.
(Required) transport-map type console transport-map-name
4.
(Required) connection wait [allow interruptible | none {disconnect}] 
5.
(Optional) banner [diagnostic | wait] banner-message
6.
(Required) exit
7.
(Required) transport type console console-line-number input transport-map-name
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode. 
•
Enter your password if prompted.
Step 2
configure
 terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
transport-map type console 
transport-map-name
Example:
Router(config)# transport-map type console 
consolehandler
Creates and names a transport map for handling console 
connections, and enter transport map configuration mode.
Step 4
connection wait
 [allow interruptible | none]
Example:
Router(config-tmap)# connection wait none
Specifies how a console connection will be handled using 
this transport map:
•
allow interruptible—The console connection waits for 
an IOS vty line to become available, and also allows 
user to enter diagnostic mode by interrupting a console 
connection waiting for the IOS vty line to become 
available. This is the default setting.
Note
Users can interrupt a waiting connection by 
entering Ctrl-C or Ctrl-Shift-6.
•
none—The console connection immediately enters 
diagnostic mode.