Cisco Systems 1000 Series Manual De Usuario

In the following example, a transport map that will make all Telnet connections wait for an IOS vty line 
to become available before connecting to the router, while also allowing the user to interrupt the process 
and enter diagnostic mode, is configured and applied to the Management Ethernet interface (interface 
gigabitethernet 0).

A diagnostic and a wait banner are also configured.

The transport map is then applied to the interface when the transport type persistent telnet input 
command is entered to enable persistent Telnet. 

Router(config)# transport-map type persistent telnet telnethandler

Router(config-tmap)# connection wait allow interruptible

Router(config-tmap)# banner diagnostic X

Enter TEXT message.  End with the character 'X'.

--Welcome to Diagnostic Mode--

X

Router(config-tmap)# banner wait X

Enter TEXT message.  End with the character 'X'.

--Waiting for IOS Process--

X

Router(config-tmap)# transport interface gigabitethernet 0

Router(config-tmap)# exit

Router(config)# transport type persistent telnet input telnethandler

Router(config-tmap)# exit

Exits transport map configuration mode to re-enter global 
configuration mode.

Router(config)# transport type persistent 

Applies the settings defined in the transport map to the 
Management Ethernet interface.

The transport-map-name for this command must match the 
transport-map-name defined in the transport-map type 
persistent telnet command.