Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco Systems
  4. 1000 Series
  5. Manual De Usuario

Cisco Systems 1000 Series Manual De Usuario

Descargar
Página de 702
 
16-52
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 16      Configuring MPLS Layer 2 VPNs
  Configuring HDLC-Ethernet Interworking
The following example shows how to configure the HDLC-Ethernet interworking on the Controller slot 
on Ethernet PE:
controller E1 0/1/0 
channel-group 0 timeslots 1 
no shutdown 
interface Serial0/1/0:0
no shutdown 
The following example shows how to configure the HDLC-Ethernet interworking using legacy CLI.
The following example shows how to configure on HDLC-CE and HDLC-PE in Bridged (Ethernet) 
mode using legacy CLI:
On HDLC-CE
configure terminal
bridge irb
bridge 1 protocol ieee
bridge 1 route ip
!
int BVI1 
ip address 192.168.1.1 255.255.255.0
no shut
!
interface Serial2/0:0
description Connect to PE1
encapsulation hdlc
bridge-group 1
no shut
end
HDLC-PE:
configure terminal
pseudowire-class pw-iw-eth
 encapsulation mpls
 interworking Ethernet
!
interface Serial0/1/0:0
 description Connect to CE1
 encapsulation hdlc
 no ip address
 xconnect 3.3.3.3 100 pw-class pw-iw-eth
 no shut
end
The following example shows how to configure Ethernet on Ethernet-CE and Ethernet-PE in Bridged 
(Ethernet) mode using legacy CLI:
On Ethernet-CE
configure terminal
interface GigabitEthernet0/1
description Connect to PE2
ip address 192.168.1.2 255.255.255.0
ip irdp
ip irdp maxadvertinterval 4
no shut
end
On Ethernet-PE
configure terminal
pseudowire-class pw-iw-eth