Cisco Systems 1000 Series Manual De Usuario

18-16

Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide

OL-16506-17

Chapter 18 LSM-MLDP-based MVPN Support

Configuration on Receiver PE

Step 8

mdt default mpls MLDP

root-node

Example:

Router(config-vrf)# mdt default mpls

MLDP 2.2.2.2

Configures MLDP multicast distribution tree (MDT) for
a VRF.

Note

LSPVIF tunnel is created as a result of this
command.

Step 9

end

Example:

Router(config-vrf)# end

Closes the configuration session.

Command

Purpose

Command

Purpose

Step 1

enable

Example:

Router> enable

Enables privileged EXEC mode.

•

Enter your password when prompted.

Step 2

configure

terminal

Example:

Router# configure terminal

Enters global configuration mode.

Step 3

vrf definition

vrf-name

Example:

Router(config)# ip vrf blue

Defines the VPN routing instance by assigning a VRF
name, and enters the VRF configuration mode.

The vrf-name argument is the name assigned to a VRF.

Step 4

route-distinguisher

Example:

Router(config-if)# rd 10:3

Creates routing and forwarding tables. Specify the
route-distinguisher argument to add an 8-byte value to
create a VPN prefix. You can enter an RD value in either
of these formats:

•

16-bit autonomous system number: Your 16-bit
number. For example, 101:3.

•

32-bit IP address: Your 32-bit number. For example,
192.168.122.15:1.

Step 5

vpn id

vpn-id

Example:

Router(config-if)# vpn id 10:3

Sets or updates a VPN identifier on a VRF.