Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco Systems
  4. 1000 Series
  5. Manual De Usuario

Cisco Systems 1000 Series Manual De Usuario

Descargar
Página de 702
 
19-7
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-15
Chapter 19      Cisco ASR 1000 VxLAN Support
  Configuring the Cisco ASR 1000 Routers as a VxLAN Layer 2 Gateway with Unicast
The following example displays the NVE VNIs assigned to NVE interface 1:
Router(config)# show nve vni interface nve1
Interface  VNI          mcast       VNI state
nve1       1010        239.0.0.0      UP
nve1       1110        239.0.0.0      UP
The following example shows the status of NVE interface 1:
Router(config)# show nve interface nve1
Interface: nve1, State: Admin Up, Oper Up Encapsulation: Vxlan
source-interface: Loopback0 (primary:11.11.11.11 vrf:0)
The following example shows a detailed display for NVE interface 1:
Router(config)# show nve interface nve1 detail
Interface: nve1, State: Admin Up, Oper Up Encapsulation: Vxlan
source-interface: Loopback0 (primary:11.11.11.11 vrf:0)
Pkts In   Bytes In   Pkts Out  Bytes Out
0          0          0          0
The following example shows the NVE peers configured on the router:
Router(config)# show nve peers
Interface Peer-IP         VNI      Up Time
nve1       1.1.1.2        1010      10h
nve2       1.1.1.3        2030      20h  
The following example shows the bridge domain configuration with the entry in bold displaying the 
VM’s MAC address that was learned on the VxLAN VNI:
Router# show bridge-domain 1000
Bridge-domain 1000 (3 ports in all)
State: UP                    Mac learning: Enabled
Aging-Timer: 300 second(s)
    GigabitEthernet1 service instance 1000
    GigabitEthernet3 service instance 1000
    vni 7639335
   MAC address    Policy  Tag      Age  Pseudoport
   FFFF.FFFF.FFFF flood   static   0    OLIST_PTR:0xe9c2b410
   0050.56A4.ECD2 forward dynamic  297  nve1.VNI7639335 VxLAN [src:10.0.0.1
 
 dst:10.0.0.2]
   0050.56A4.257A forward dynamic  297  GigabitEthernet3.EFP1000
Configuring the Cisco ASR 1000 Routers as a VxLAN Layer 2 
Gateway with Unicast
The following example shows VxLAN with unicast ingress-replication which is a point-to-point 
(unicast) configuration. 
interface Loopback0
ip address 11.11.11.11 255.255.255.255
!
interface nve1
no ip address
member vni 5001
  ingress-replication 22.22.22.22  < Remote L2 GW loopback ip>
!
source-interface Loopback0
!