Cisco Systems 1000 Series Manual De Usuario

20-4

Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide

OL-16506-17

Chapter 20 Tracing and Trace Management

om Notice

peer Notice

qos Notice

route-map Notice

sbc Notice

services Notice

sw_wdog Notice

tdl_acl_config_type Notice

tdl_acl_db_type Notice

tdl_cdlcore_message Notice

tdl_cef_config_common_type Notice

tdl_cef_config_type Notice

tdl_dpidb_config_type Notice

tdl_fman_rp_comm_type Notice

tdl_fman_rp_message Notice

tdl_fw_config_type Notice

tdl_hapi_tdl_type Notice

tdl_icmp_type Notice

tdl_ip_options_type Notice

tdl_ipc_ack_type Notice

tdl_ipsec_db_type Notice

tdl_mcp_comm_type Notice

tdl_mlp_config_type Notice

tdl_mlp_db_type Notice

tdl_om_type Notice

tdl_ui_message Notice

tdl_ui_type Notice

tdl_urpf_config_type Notice

tdllib Notice

trans_avl Notice

uihandler Notice

uipeer Notice

uistatus Notice

urpf Notice

vista Notice

wccp Notice

Setting a Tracing Level

To set a tracing level for any module on the Cisco ASR 1000 Series Routers, or for all modules within a
process on the Cisco ASR 1000 Series Router, enter the platform software trace privileged EXEC and
diagnostic mode command.

In the following example, the trace level for the forwarding processor

module in the Forwarding

Manager of the ESP processor in slot 0 is set to the informational tracing level (info):

Router(config)# platform trace runtime slot F0 bay 0 process forwarding-manager module

interfaces level info

In the following example, the trace level for the forwarding processor

module in the Forwarding

Manager of the ESP processor in slot R0 is set to the informational tracing level (max):

Router(config)# platform trace boottime slot R0 bay 1 process forwarding-manager

forwarding-manager level max

See the platform trace boottime process forwarding-manager moduleinterfaces and platform trace
runtime process forwarding-manager moduleinterfaces command reference for additional
information about the options for this command.