Cisco Systems WRVS4400N Manual De Usuario
Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the QoS Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
118
5
•
L2TP Passthrough
—Layer 2 Tunneling Protocol is the similar to PPP but
allows Layer 2 and the PPP session to terminate at different servers or
locations. L2TP Passthrough is enabled by default. To disable L2TP
Passthrough, select Disabled.
locations. L2TP Passthrough is enabled by default. To disable L2TP
Passthrough, select Disabled.
STEP 3
Click Save.
Configuring the QoS Settings
This section describes how to configure the QoS settings of the router:
•
•
•
QoS allows you to perform bandwidth management, by either rate control or
priority. You can also configure the QoS Trust Mode and DSCP settings.
priority. You can also configure the QoS Trust Mode and DSCP settings.