Cisco Systems 2500 SERIES Manual De Usuario

Passphrase

If you want to generate keys for encryption, enter a word or group of 
printable characters and click the Generate button. If WEP encryption is set 
to 64 bit, each of the 4 key fields is populated with a key value. If WEP 
encryption strength is set to 128 bit, only the first WEP key field is populated 
with a key value.

Key 1

 

Key 2

 

Key 3

 

Key 4

Enter the WEP key value, in hexadecimal format, that the IP camera uses to 
connect to the network.

Each wireless IP camera that accesses the same access point in a network 
must have the same WEP key values.

Authentication

Choose the appropriate value, Open System or Shared Key. Refer to the 
documentation for your wireless card to determine the method to use.

In Infrastructure mode, either setting typically works, because most 
access points can use both methods.

These options appear if you choose WPA/WPA2 from the Security Mode drop-down list.

Encryption

Display only. Encryption algorithm that is used by the IP camera: TKIP and 
AES.

Shared Key

Enter a value for the shared key. The value must contain from 8 to 63 
alphanumeric characters. Data is encrypted using an algorithm that is 
derived from this network key. 

Each wireless IP camera that accesses the same access point in a network 
must have the same shared key values.