Cisco Systems 2500 SERIES Manual De Usuario

The Firmware window lets you view information about the firmware that is installed on the IP camera 
and upgrade the firmware.

Before you upgrade firmware, download the firmware file to a PC that is accessible on your network and 
unzip the file if it is zipped. To download firmware, go to this web page:

After you upgrade firmware, the IP camera restarts automatically. It retains all configuration 
information.

To display the Firmware window, access the configuration windows as described in the 

, click Administration, then click Firmware.

 describes the options in the Firmware window.

The Audio/Video windows provide options for configuring audio and video from the IP camera.

The following sections describe the Setup windows in detail:

The Video window provides options for configuring the video from the IP camera. You can configure 
settings for the primary and an optional secondary video stream.

Configuring a secondary stream is useful for providing third-party devices or software with a video 
stream that is at a lower resolution than the primary. Some devices and software require this lower 
resolution. For related information, see the 

.

Firmware Version

Display only. Firmware version that is loaded on the IP camera.

Upgrade

Click the Upgrade button to upgrade the firmware on the IP camera.

When you click this button, the Upgrade Firmware window appears. In this 
window, enter the path and folder where the firmware upgrade file for the IP 
camera is stored. The upgrade file may be stored on another PC. You can 
click Browse to find this location. After you enter this information, click 
Upgrade and follow the on-screen prompts to load the firmware upgrade on 
the IP camera.

Do not power down the IP camera during the upgrade procedure.

Recovery Firmware 
Version

Display only. Firmware version of the recovery image. If an upgrade fails, 
the IP camera boots from the recovery image.