Cisco Systems 2500 SERIES Manual De Usuario
3-29
Cisco Video Surveillance 2500 Series IP Camera User Guide
OL-19273-02
Chapter 3 Configuring and Managing the IP Camera
Applications Windows
To display the Mail & FTP window, access the configuration windows as described in the
, click Applications, then click Mail & FTP.
If you change any options in the Mail & FTP window, you must click Save to save the changes. To
discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the
window. You may need to scroll down to see them.
discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the
window. You may need to scroll down to see them.
describes the options in the Mail & FTP window.
Table 3-15
Mail & FTP Window Options
Option
Description
Primary SMTP Server
Primary SMTP
Check this check box to cause e-mail messages to be sent to the primary
Simple Mail Transport Protocol (SMTP) server.
Simple Mail Transport Protocol (SMTP) server.
SMTP Mail Server
Enter the name or IP address of the primary SMTP server.
If you enter a name, you must configure the Primary DNS option as
described in the
described in the
Authentication
If the primary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type. The authentication type typically is the
same as that for the POP3 server that you use to receive e-mail.
the appropriate authentication type. The authentication type typically is the
same as that for the POP3 server that you use to receive e-mail.
Account Name
If the primary SMTP server requires authentication, enter the account name
for the server.
for the server.
Password
If the primary SMTP server requires authentication, enter the account
password for the server.
password for the server.
POP Server Name
Enter the name of the POP3 mail server that you use to receive e-mail.
Secondary SMTP Server
Secondary SMTP
Check this check box to cause e-mail messages to be sent to a secondary
(backup) SMTP server if the primary SMTP server is unavailable.
(backup) SMTP server if the primary SMTP server is unavailable.
SMTP Mail Server
Enter the IP address of the secondary SMTP server.
Authentication
If the secondary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type. The authentication type typically is the
same as that for the POP3 server that you use to receive e-mail.
the appropriate authentication type. The authentication type typically is the
same as that for the POP3 server that you use to receive e-mail.
Account Name
If the secondary SMTP server requires authentication, enter the account
name for the server.
name for the server.
Password
If the secondary SMTP server requires authentication, enter the account
password for the server.
password for the server.
POP Server Name
Enter the name of the POP3 mail server that you use to receive e-mail.
E-Mail Setup
Send To
Enter at least 1 e-mail address to which e-mail messages are sent when an
event occurs. The second and third addresses are optional.
event occurs. The second and third addresses are optional.
Show “From” as
Enter the e-mail address to be shown in the From field for e-mail messages
that are sent when an event occurs.
that are sent when an event occurs.
Subject
Enter the text to be shown in the Subject field for the e-mail messages that
the IP camera sends when events occur. The subject can contain up to 48
characters, including spaces.
the IP camera sends when events occur. The subject can contain up to 48
characters, including spaces.