Cisco Systems 2500 SERIES Manual De Usuario
3-43
Cisco Video Surveillance 2500 Series IP Camera User Guide
OL-19273-02
Chapter 3 Configuring and Managing the IP Camera
Status Windows
Table 3-26
Syslog and Log Information
Message
Explanation
System log messages.
Note
These messages appear if you enable the System Log option.
Alert: Detected motion
Alert generated by the IP camera detecting motion
in a configured video field.
in a configured video field.
Alert: Input Port Port_Number triggered.
Alert generated by the indicated port changing
state.
state.
Audio: Disable microphone.
Captures information when audio devices are
enabled or disabled in the Audio window.
enabled or disabled in the Audio window.
Audio: Disable speaker.
Audio: Enable microphone. (audio type: G.711
A-Law)
A-Law)
Audio: Enable microphone. (audio type: G.711
u-Law)
u-Law)
Audio: Enable microphone. (audio type: G.726)
Audio: Enable speaker.
DHCP: Lease release successfully.
Provides information about DHCP activities in
networks that include DHCP.
networks that include DHCP.
DHCP: Lease release unsuccessfully.
DHCP: Lease renewal successfully.
DHCP: Lease renewal unsuccessfully.
DHCP: Timeout error when renewing DHCP
lease.
lease.
DST: Adjust DST Number hour automatically.
The IP camera has automatically adjusted its clock
by the indicated number of hours for the beginning
or end of daylight saving time.
by the indicated number of hours for the beginning
or end of daylight saving time.
DST: DST begin.
The IP camera has adjusted its clock for the
beginning of daylight saving time.
beginning of daylight saving time.
DST: DST end.
The IP camera has adjusted its clock for the end of
daylight saving time.
daylight saving time.
LOG: Clear all messages.
You have used the Clear Log button to delete the
log file from the IP camera SDRAM.
log file from the IP camera SDRAM.
LOG: Log file is full. Start to wrap around.
The IP camera SDRAM is full and existing log
information is beginning to be overwritten.
information is beginning to be overwritten.
Network: Failed to get the IP address. Camera set
to default IP address.
to default IP address.
IP camera is unable to obtain an IP address
through DHCP and is set to the default IP address
of 192.168.0.100.
through DHCP and is set to the default IP address
of 192.168.0.100.
Network: LAN activated.
IP camera obtained a network IP address.
Network: Wired link down.
Wired IP camera lost connection to the network.
Network: Wired link up.
Wired IP camera established connection to the
network.
network.
Network: Wireless activated.
Wireless IP camera successfully associated with
an access point and obtained an IP address
an access point and obtained an IP address