Cisco Systems 9000 Manual De Usuario
3-24
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter 3 Installing Cards and Modules in the Chassis
Connecting Cables to the RSP or RP
Connecting to the Console Port
The system console port on the RSP/RP is an RJ-45 receptacle for connecting a data terminal to perform
the initial configuration of the router. The console port requires a straight-through RJ-45 cable.
the initial configuration of the router. The console port requires a straight-through RJ-45 cable.
See
port.
Follow this procedure to connect a data terminal to the RSP/RP console port:
Step 1
Set your terminal to these operational values: 9600 bps, 8 data bits, no parity, 2 stop bits (9600 8N2).
Step 2
Power off the data terminal.
Step 3
Attach the terminal end of the cable to the interface port on the data terminal.
Step 4
Attach the other end of the cable to the RSP/RP console port.
Step 5
Power on the data terminal.
Connecting to the Auxiliary Port
The auxiliary port on the RSP/RP is a RJ-45 receptacle for connecting a modem or other data
communication equipment (DCE) device (such as another router) to the RSP/RP. The asynchronous
auxiliary port supports hardware flow control and modem control.
communication equipment (DCE) device (such as another router) to the RSP/RP. The asynchronous
auxiliary port supports hardware flow control and modem control.
See
port.
Follow this procedure to connect an asynchronous serial device to the RSP/RP auxiliary port:
Step 1
Power off the asynchronous serial device.
Step 2
Attach the device end of the cable to the interface port on the asynchronous serial device.
Step 3
Attach the other end of the cable to the RSP/RP auxiliary port.
Step 4
Power on the asynchronous serial device.
Connecting to the Ethernet Management Ports
To connect cables to the RSP/RP management ports, attach Category 5 UTP cables directly to the
MGT LAN 0 and MGT LAN 1 RJ-45 receptacles on the RSP/RP.
MGT LAN 0 and MGT LAN 1 RJ-45 receptacles on the RSP/RP.
See
for additional information about the
Ethernet management LAN ports.
Note
RJ-45 cables are not available from Cisco Systems; they are available from outside commercial cable
vendors. Use cables that comply with EIA/TIA-568 standards.
vendors. Use cables that comply with EIA/TIA-568 standards.