Cisco Systems 9000 Manual De Usuario
4-28
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter 4 Troubleshooting the Installation
Troubleshooting the Route Processor Subsystem
•
LINK—Indicates link activity.
•
ACT—Indicates which Ethernet port is selected (ETH 0 or ETH 1).
Note
Because both ports are supported on the RSP/RP card, MGT LAN 0 is always on. MGT LAN 0
lights when it is selected.
lights when it is selected.
Figure 4-10
Management LAN Port Activity LEDs
Auxiliary and Console Ports
The auxiliary and console ports on the RSP/RP are EIA/TIA-232 (also known as RS-232) asynchronous
serial ports connect external devices to monitor and manage the system:
serial ports connect external devices to monitor and manage the system:
•
Auxiliary port—RJ-45 interface that supports flow control and is often used to connect a modem, a
channel service unit (CSU), or other optional equipment for Telnet management.
channel service unit (CSU), or other optional equipment for Telnet management.
•
Console port—Receptacle (female) that provides a RJ-45 interface for connecting a console
terminal.
terminal.
Alphanumeric Message Displays
The alphanumeric message displays are organized in one row of four LED characters (see callout 8 in
for the RSP card, callout 12 in
for the RSP-440 and RSP-440 Lite cards, callout
13 in
for the RSP-880 card, callout 13 in
for the RP card, and callout 13 in
for the RP2 card.
The alphanumeric message displays show router status messages during the boot process and after the
boot process is complete:
boot process is complete:
•
During the boot process, the message displays are controlled directly by the CAN microcontroller.
•
After the boot process, the message displays are controlled by Cisco IOS XR software (through the
CAN bus).
CAN bus).
•
Cisco IOS XR System Error Message Reference Guide
The alphanumeric message displays also provide information about different levels of system operation,
including the status of the RSP/RP, router error messages, and user-defined status and error messages.
including the status of the RSP/RP, router error messages, and user-defined status and error messages.
Note
For a list of all system and error messages, see the
243165