Cisco Systems A9KMOD80TR Manual De Usuario
F I N A L D R A F T — C i s c o C o n f i d e n t i a l
1-13
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-17502-01
Chapter 1 Introducing to the Cisco ASR 9000 Series Aggregation Services Router
Where to Go Next
Configuring Gigabit Ethernet and 10-Gigabit Ethernet Interfaces
After connecting to the router, you need to configure Gigabit Ethernet and Ten Gigabit Ethernet
interfaces manually. Because these interfaces are for data traffic only, not management traffic, you
cannot use SSH or Telnet to an IP address that is part of the Gigabit Ethernet and 10-Gigabit Ethernet
interfaces.
interfaces manually. Because these interfaces are for data traffic only, not management traffic, you
cannot use SSH or Telnet to an IP address that is part of the Gigabit Ethernet and 10-Gigabit Ethernet
interfaces.
Where to Go Next
Once you have logged into the router, you are ready to perform general router configuration as described
in
in
Step 5
Log in to the router.
Establishes your access rights for the router management
session.
session.
•
Type the root-system username and password or the
username and password provided by your system
administrator.
username and password provided by your system
administrator.
•
After you log in, the router displays the CLI prompt,
which is described in the
which is described in the
Step 6
admin
Example:
RP/0/RSP0/CPU0:router# admin
Places the router in administration EXEC mode.
Step 7
show dsc
Example:
RP/0/RSP0/CPU0:RO-A(admin)#sh dsc
NODE ROLE
========================
0/RSP0/CPU0 DSC
0/RSP1/CPU0 Backup DSC
RP/0/RSP0/CPU0:RO-A(admin)#
Displays the RSP information for the router so that you can
verify that you have connected successfully to the console
port.
verify that you have connected successfully to the console
port.
Command or Action
Purpose