Actiontec electronic IS560LH Manual De Usuario
65
Description
Example
Comments
Call Termination Cause
0
0 -Call Terminated by Local
modem 1 -Call Terminated
by Remote modem 2 -No
Answer - the Remote mo-
dem did not answer 3 -Train-
ing Failure - the modems
failed to negotiate V.34 or
56K protocols. 4 -Protocol
Failure - the modems failed
to negotiate V.42 protocol.
modem 1 -Call Terminated
by Remote modem 2 -No
Answer - the Remote mo-
dem did not answer 3 -Train-
ing Failure - the modems
failed to negotiate V.34 or
56K protocols. 4 -Protocol
Failure - the modems failed
to negotiate V.42 protocol.
Robbed-Bit Signaling (56K only) 6
The number of robbed bits
detected.
detected.
Digital Loss
0
Digital Loss in dB.
Remote Server ID
XXX
ID number of remote server.
S-Registers Reference
S-registers generally affect how the AT commands perform. Contents of the registers
can be displayed or modified when the modem is in command mode.
can be displayed or modified when the modem is in command mode.
To display the value of an S-register, type
ATSn?
where n is the register number. Press ENTER.
To modify the value of an S-register, type
ATSn = r
where n is the register number, and r is the new register value. Press ENTER.
S0
Auto Answer Ring Number
Range:
0
−
255
Default:
0
Units:
rings
This register determines the number of rings the modem will count before automati-
cally answering a call. Enter 0 (zero) if you do not want the modem to automatically
answer at all. When disabled, the modem can only answer with an ATA command.
cally answering a call. Enter 0 (zero) if you do not want the modem to automatically
answer at all. When disabled, the modem can only answer with an ATA command.