Cisco Systems 8540 CSR Manual De Usuario

Interface Configuration Mode:

     ATM clock line; STS-3c

k1/k2 = 0/0

c2 = 0x13

Active Defects:None

Alarm reporting enabled for:SF SLOS SLOF B1-TCA B2-TCA PLOP B3-TCA

Active ATM Payload Defect:None

OC3 counters:

  b1     - # section BIP-8 errors

  b2     - # line BIP-8 errors

  b3     - # path BIP-8 errors

  ocd    - # out-of-cell delineation errors - not implemented

  g1     - # path FEBE errors

  z2     - # line FEBE errors

  chcs   - # correctable HEC errors

  uhcs   - # uncorrectable HEC errors

b1:0, b2:0, b3:0, ocd:0

g1:0, z2:0, chcs:0, uhcs:0

OC3 errored secs:

b1:0, b2:0, b3:0, ocd:0

g1:0, z2:0, chcs:0, uhcs:0

lineAIS:0, lineRDI:0, pathAIS:0, pathRDI:0

OC3 error-free secs:

b1:110, b2:110, b3:110, ocd:0

g1:110, z2:110, chcs:110, uhcs:110

phy_tx_cnt:38947300, phy_rx_cnt:15

BER thresholds: SF = 10e-3  SD = 10e-6

TCA thresholds: B1 = 10e-6  B2 = 10e-6  B3 = 10e-6

Port-based snooping, or mirroring, lets you transparently mirror traffic from a source port(s) to a
destination port. Multiple snooping sessions can operate simultaneously. You can specify whether the
source ports are mirrored for transmit, receive, or both directions at once.

Port snooping augments the first four RMON groups (mini-RMON). For a description of RMON, see
the “Remote Monitoring” section on page 1-11.

Port-based snooping features include the following:

Traffic on one or more source ports through a destination port in the same switch router

Traffic from multiple source ports in multiple directions: transmitting, receiving, or both

Multiple snoop destination ports operating simultaneously (however, there is only one destination
port per snooping session)