Linksys WRT320N Manual De Usuario

The  Router  has  two  wall-mount  slots  on  its  bottom 

panel.  The  distance  between  the  slots  is  152  mm  

(6 inches). 
Two screws are needed to mount the Router.

2.5–3.0 mm

4–5 mm

1–1.5 mm

Note: Mounting hardware illustrations are not 

 

†

true to scale.

  Linksys  is  not  responsible  for  damages 

incurred by insecure wall-mounting hardware. 

Follow these instructions:

Determine  where  you  want  to  mount  the  Router. 

1. 

Make sure that the wall you use is smooth, flat, dry and 

sturdy. Also make sure the location is within reach of 

an electrical socket.
Drill two holes into the wall. Make sure the holes are  

2. 

152 mm (6 inches) apart.
Insert  a  screw  into  each  hole  and  leave  3  mm  

3. 

(0.12 inches) of its head exposed.
Manoeuvre the Router so the wall-mount slots line up 

4. 

with the two screws.
Place the wall-mount slots over the screws and slide 

5. 

the  Router  down  until  the  screws  fit  snugly  into  the 

wall-mount slots.

152 mm

Wall Mounting Template

Print this page at 100% size. 
Cut along the dotted line, and place on the wall to drill precise spacing.