Compaq 380 Manual De Usuario
1
SECTION 1. FEATURES AND SPECIFICATIONS
The IntelliStripe
®
380, Desktop Motorized Reader-Encoder reads and encodes magnetic-stripe
cards and smartcards.
CONFIGURATIONS
Part numbers and descriptions for the basic configuration are as follows:
16050408 IntelliStripe
CONFIGURATIONS
Part numbers and descriptions for the basic configuration are as follows:
16050408 IntelliStripe
380
16050410
IntelliStripe 380, Magstripe Only
16051417
I/O Cable, 10-pin RJ45 connector connects to host 9-pin connector with
12V/Ground connector for Power Supply.
12V/Ground connector for Power Supply.
16051422
USB Cable, 5-pin mini B plug, connects to host 4-pin USB Type A Plug with the
10-pin RJ45 and 12V/Ground connector for Power Supply.
10-pin RJ45 and 12V/Ground connector for Power Supply.
64300091
Power Supply 12 VDC, 4 A output, 100 –240 VAC auto ranging input.
71100001
AC power cord, P/N is for use in North America. Other users must supply their
own cord, or contact MagTek for international cords.
own cord, or contact MagTek for international cords.
FEATURES
The IntelliStripe 380 provides the following key features:
•
3-Track magstripe read and encode with support for HiCo and LoCo cards.
Also supports Drivers License and Custom format encode scheme.
Also supports Drivers License and Custom format encode scheme.
•
EMV T=0, T=1 Smartcard Interface. Also supports popular memory cards.
•
Optional support for 6-socket SAM Ranch using a piggyback PCB.
•
RS-232 or USB primary host interface using MCP protocol.
•
Auxiliary RS-232 interface to support an external interface.
•
Small and attractive desktop enclosure with easy access to Optional SAM(s).
Also provides facilities for cable strain-relief and card-jam clearing.
Also provides facilities for cable strain-relief and card-jam clearing.
•
FLASH programmable
•
Dual Color LED status indicator.
•
Single cable with remote power pack. Power is routed through communications cable.
•
Optional Tamper Switch