Linksys WRVS4400N Manual De Usuario
68
Chapter 6: Setting Up and Configuring the Router
Administration Tab
Administration Tab
Wireless-N Gigabit Security Router with VPN
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Help information is displayed on the right-hand side of the screen, and click
More for additional details.
Changes to cancel your changes. Help information is displayed on the right-hand side of the screen, and click
More for additional details.
Log
This screen provides you options on how you want to manage your system logs. The Wireless Router provides
four categories of event logging (Firewall, VPN, System, and ACL). You can configure the Wireless Router to send
the event log to you through e-mail, upload the log to syslog server, or view the log locally on the Wireless Router.
four categories of event logging (Firewall, VPN, System, and ACL). You can configure the Wireless Router to send
the event log to you through e-mail, upload the log to syslog server, or view the log locally on the Wireless Router.
Email Alerts. If enabled, an e-mail will be sent when the number of DoS events exceeds the defined threshold or
the total events number exceed 100. If enabled, the e-mail address information (below) must be provided.
the total events number exceed 100. If enabled, the e-mail address information (below) must be provided.
Denial of Service Thresholds. Enter the number of DoS (Denial of Service) attacks that need to be detected (and
blocked) by the software firewall before an e-mail alert is sent. The minimum value is 20, the maximum value is
100. Note that if IPS has been enabled, IPS would block DoS attacks before they reach the firewall. In that case,
please check the IPS Report to know event details.
blocked) by the software firewall before an e-mail alert is sent. The minimum value is 20, the maximum value is
100. Note that if IPS has been enabled, IPS would block DoS attacks before they reach the firewall. In that case,
please check the IPS Report to know event details.
SMTP Mail Server. Enter the address (domain name) or IP address of the SMTP (Simple Mail Transport Protocol)
server you use for outgoing e-mails.
server you use for outgoing e-mails.
Email Address for Alert Logs. Enter the e-mail address the log is to be sent to.
Return Email Address. The e-mail will show this address as the sender's address.
Enable Syslog. Select Enable if you want to use this feature.
Syslog Server. Enter the IP Address in the Syslog Server field when Enable Syslog is checked.
Local Log. Enable this if you want to see the log locally on the Wireless Router.
View Log button. If Local Log is enabled, click View Log to view the event log on the Wireless Router.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Help information is displayed on the right-hand side of the screen, and click
More for additional details.
Changes to cancel your changes. Help information is displayed on the right-hand side of the screen, and click
More for additional details.
Figure 6-50: Administration - Log
Figure 6-51: View Log pop-up window