Lucent Technologies 6000 Manual De Usuario
5-14
Preliminary January 4, 2001
MAX 6000/3000 Network Configuration Guide
Configuring Frame Relay
Configuring a DLCI logical interface
Configuring a DLCI logical interface
For gateway connections:
Ethernet
Connections
Connection profile
Encaps=FR
Encaps options...
FR Prof=pacbell
DLCI=16
Circuit=N/A
Route IP=Yes
Ip options...
LAN Adrs=10.2.3.4/24
For Frame Relay circuits:
Ethernet
Connections
Connection profile
Encaps=FR_CIR
Encaps options...
FR Prof=pacbell
DLCI=16
Circuit=circuit-1
For FR Direct connections:
Ethernet
Connections
Connection profile
Encaps=PPP
Route IP=Yes
Ip options...
LAN Adrs=10.2.3.4/24
Session options...
FR Direct=Yes
FR Prof=pacbell
DLCI=16
The Frame Relay connection parameters
This section provides some background information about the Frame Relay connection
parameters. For detailed information about each parameter, see the MAX Reference.
parameters. For detailed information about each parameter, see the MAX Reference.
Gateway connections (Encaps=FR)
Gateway connections require FR encapsulation, a Frame Relay profile name, and a DLCI.
Your Frame Relay provider tells you the DLCI to assign to each connection.
A Connection profile that specifies Frame Relay encapsulation must include a DLCI to
identify the first hop of a permanent virtual circuit (PVC). The MAX does not allow you to
enter duplicate DLCIs, except when they are carried by separate physical links specified in
different Frame Relay profiles.