Linksys WMB54G Manual De Usuario

4

Chapter 2: Getting to Know the Wireless Music Bridge

The Bridge's ports, where all cables are connected, are located on the back panel.

The Audio Out (Left and Right) ports connect to the Audio In (Left and Right) ports of your 
audio receiver.

The Line Out port is where you can connect headphones or portable audio speakers with a 
headphone jack.

The Coaxial Out (Digital Audio) port is where you connect the cable coming from your audio 
receiver.

The Optical Out (Digital Audio) port is where you connect the cable from the Optical In port of 
your audio receiver.

This Ethernet port connects to Ethernet network devices, such as a switch or router, if using a 
wired connection.

There are two ways to Reset the Bridge's factory defaults. Either press the Reset Button, for 
approximately ten seconds, or restore the defaults from the Password tab in the Bridge's Web-
Based Utility.

The Power port is where you will connect the power adapter.

 

Important: Resetting the Music Bridge will 

erase all of your settings and replace them 

with the factory defaults. Do not reset the 

Bridge if you want to retain these settings.