Linksys WRT54G3GV2-ST Manual De Usuario
AppendixA
Troubleshooting
32
Wreless-G Router for Moble Broadband
On the first screen you see, the Basic Setup screen,
click the Moble Network tab.
click the Moble Network tab.
On the Mobile Network screen, there is an Auto
Connect option at the top of the screen. Select Auto,
and then click Save Settngs.
Connect option at the top of the screen. Select Auto,
and then click Save Settngs.
After the webpage has refreshed, click the Basc
Setup tab.
Setup tab.
On the Basic Setup screen, click the Connect button
to connect to the mobile network.
to connect to the mobile network.
The next time the Router is powered on, it will
automatically connect to the mobile network.
automatically connect to the mobile network.
What do the indicator LEDs signify on the Router?
Power
(Green) The Power LED lights up and
stays on while the Router is powered on.
Ethernet 1-
(Green) These numbered LEDs,
corresponding with the numbered ports on the
Router’s back panel, serve two purposes. If the
LED is continuously lit, the Router is successfully
connected to a device through that port. It
flashes to indicate network activity over that
port.
Router’s back panel, serve two purposes. If the
LED is continuously lit, the Router is successfully
connected to a device through that port. It
flashes to indicate network activity over that
port.
Wreless
(Green) The Wireless LED lights up
when the wireless feature is enabled. It flashes
when the Router is actively sending or receiving
data over the wireless network.
when the Router is actively sending or receiving
data over the wireless network.
Modem Internet
(Green) The Modem LED
lights up and stays on when there is a connection
made through the Modem port. It flashes to
indicate network activity over the Modem port.
made through the Modem port. It flashes to
indicate network activity over the Modem port.
Moble Internet
(Blue) The Mobile LED
flashes as the Router connects to the mobile
network. When the LED stops flashing and
stays on, then the connection is active.
If the LED flashes quickly, the Router is not
connected to the mobile network. Before you
press the Mobile Connect/Disconnect button,
make sure the mobile broadband data card or
USB adapter is already installed.
network. When the LED stops flashing and
stays on, then the connection is active.
If the LED flashes quickly, the Router is not
connected to the mobile network. Before you
press the Mobile Connect/Disconnect button,
make sure the mobile broadband data card or
USB adapter is already installed.
How do you know which mobile network you are using?
Open the web browser.
Enter the Router’s IP address in the Address field (the
default IP address is 192.1.1.1). Then press Enter.
default IP address is 192.1.1.1). Then press Enter.
When prompted, complete the User name and
Password fields (the default user name and password
is admn). Click OK.
Password fields (the default user name and password
is admn). Click OK.
Click the Status tab.
4.
5.
6.
7.
8.
1.
2.
3.
4.
Click the Moble Network tab. In the Mobile Network
Status section, on the Network Name line, you will see
the name of the network you are currently using.
Status section, on the Network Name line, you will see
the name of the network you are currently using.
Whom should you call if there is a question or problem?
For technical support regarding the mobile broadband
data card or the Router, contact Sprint. If you have
questions about your bill, contact the mobile broadband
service provider.
data card or the Router, contact Sprint. If you have
questions about your bill, contact the mobile broadband
service provider.
WEB:
If your questions are not addressed here,
refer to the Sprint website, www.sprnt.com
5.