Linksys EA4500 Manual De Usuario

Maintaining and Monitoring

Linksys EA-Series

Why would I need to upgrade my router’s firmware? Linksys may periodically 

publish a firmware upgrade either to fix a problem or to add features to your 

router. 

Do not interrupt the upgrade process. You should not turn off the 

router or press the Reset button during the upgrade. Doing so may 

permanently disable the router.

Your router automatically checks for available updates and 

installs them by default. Use the following instructions only if the 

automatic firmware update has been turned off.

To upgrade the router’s firmware:
1.  Log into Cisco Connect Cloud. (See “How to configure your router” on 

page 14.

2.  Under Router Settings, click Connectivity. 
3.  Click the Basic tab.
4.  Under Firmware Update, click Check for Updates. 
5.  If an available update is found, follow the on-screen instructions to install 

it.

To have your router automatically check for updates and install 

them, select Automatic under Firmware Update. 

If you’ve tried previous troubleshooting steps and your network still doesn’t 

work, you may need to restore your router’s factory defaults. To restore your 

router to factory defaults, you can use the Reset button on the router or use 

Cisco Connect Cloud.

Whenever you restart the router, all logs that are not saved will be 

lost.

1.  With your router connected to power and turned on, press and hold the 

Reset button on the bottom or back of your router for about 15 seconds 

(until the power indicator flashes).