Linksys EA3500 Manual De Usuario

Setting Up: Advanced

Linksys EA-Series

On some router models, the IPv6 firewall lets you customize IPv6 port services 

for applications. When users send these types of requests to your network via 

the Internet, the router will allow those requests to the appropriate computers.

To use your router’s IPv6 Internet connectino settings, IPv6 service 

from your ISP (Internet service provider) is required. For more 

information on this service, ask your ISP.

To set IPv6 firewall settings:
1.  Log into Cisco Connect Cloud. (See “How to configure your router” on 

page 14.

2.  Under Router Settings, click Security. The Security page opens to the 

Firewall tab.

3.  Click Add IPv6 Firewall Setting. You can now change the following fields:

 

•

Description—Enter a description of the application.

 

•

Protocol—Select TCP, UDP, or Both (default). 

 

•

IPv6 Address—Enter the IPv6 address of the computer that should 

receive the traffic. 

 

•

Allow—Select the range of port(s) used by incoming traffic.

4.  Click Save to save your changes. The list is updated to show the settings 

you have saved.

 •

To change a saved setting, click Edit next to the setting.

 •

To delete a saved setting, click Remove next to the setting.

Your  router  can  be  used  as  a  DHCP  (Dynamic  Host  Configuration  Protocol) 

server  to  automatically  assign  an  IP  address  to  each  computer  or  device  on 

your  network. The  DHCP  server  is  enabled  by  default.  If  you  already  have  a 

DHCP server on your network, or if you do not want to use your router as a 

DHCP server, you should disable this setting. 

To configure your router’s DHCP server settings:
1.  Log into Cisco Connect Cloud. (See “How to configure your router” on 

page 14.

2.  Under Router Settings, click Connectivity.