MicroNet Technology SP5001/S Manual De Usuario

 

 

 

 

  33 

6. 

Network Interface Screen 

Click Network Interface in the navigation panel and open the Network Interface 

Screen. 

Use this screen to setup Network Interface identification information for SP5001/S. 

 

 

The following table describes this screen. 

IP Address 

Enter the IP Address of SP5001/S in dotted decimal notation for e.g. 

192.168.4.92. Range of IP Address setting (0.0.0.0~255.255.55.255). 

Subnet Mask 

Enter the IP Subnet Mask of your SP5001/S in dotted decimal notation for 

e.g. 255.255.0.0. 

Default Routing 

Gateway 

Enter the IP Address of the default-outgoing gateway of your SP5001/S in 

dotted decimal notation for e.g. 192.168.1.254. 

DHCP 

Select enable/disable Dynamic Host Configuration. 

DNS primary 

Enter the DNS IP Address in dotted decimal notation for e.g. 168.95.1.1 

DNS Secondary 

Enter the DNS secondary IP Address in dotted decimal notation for e.g. 

168.95.1.1 

SNTP 

Select enable/disable Simple Network Time Protocol.