MicroNet Technology SP5001/S Manual De Usuario

 

 

 

 

  51 

19.2 

 Power Up Your SP5001/S 

At this point, you should have connected the console port, the LAN Port, the WAN port 

and the power port to the appropriate devices or lines. Plug the power adapter into a 

wall outlet. The Power LED should be on. The Status LED will come on after the 

system tests are complete. The WAN LED and one of the LAN LEDs come on 

immediately after the Status LED come on, if connections have been made to the LAN 

and WAN ports. 

When you power on, your SP5001/S will perform server internal tests as well as line 

initialization. 

After the tests, SP5001/S asks you to enter the Login, as shown. 

Attached TCP/IP interface to cpm unit 0 

Attaching interface lo0...done 

 

Please wait while system is initializing .......... SAttached TCP/IP interface 

to cpm unit 0 

Attaching interface lo0...done 

WorkMode : PEER2PEER_MODE 

 

 AC4804[0] is ok 

 successful 1 2 

 Initialize OSS libraries...OK! 

VP v1.40 stack open successfully. 

 

login: 

 

For you first login, enter the login root and default password “Null”. As you type the 

password, the screen displays and (*) for each character you type. 

AC4804[0] is ok 

successful 

Initialize OSS libraries...OK! 

VP v1.40 stack open successfully. 

 

login:root 

Welcome to Terminal Configuration Mode 

Please enter your configuration item 

 

usr/config$ 

 

Note: root or administrator is the default login name and there is no password needed.