MicroNet Technology SP5001/S Manual De Usuario

 

 

 

 

  58 

 

 

1. 

The WAN IP Address obtained from ADSL has two kinds of methods. 

One is fixed IP Address, while user applies for one or more fixed IP 

Addresses. Another is dynamic IP Address while user applies for dial-up 

connection way.   

2. 

The LAN IP Address of User’s PC can be set as DHCP client in order to 

gain a valid one.   

3. 

Assign an IP address to each set using DHCP or fixed address. 

4. 

Enable the IP Sharing function for each set using following command.   

Fixed IP Address 

usr/config$ ifaddr – ipsharing 1 210.11.22.33 

 

5. 

Configure separate SIP port and RTP port for each set to prevent from 

port conflict. For example, if set A uses the default settings (SIP port: 

5060, RTP port: 16384), you must change set B’s setting to SIP port 

equal to 5061 and RTP port equal to 26384 for instance. 

Change SIP port –  usr/config$sip – port 5061 

Change RTP port –  usr/config$sip – rtp 26384 

6. 

Use the Port Forwarding or Port Redirection function provided by IP 

Sharing device (Router). See the following for example.