Motorola 57976500400 Manual De Usuario

Descargar
Página de 68
Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit 
www.motorola.com/us/support
 for FAQs and additional product documentation.
23
Security
The 2247-N8 supports up to four wireless networks, and each network can have a separate security setting. 
Wireless Security Page
Use the options below to configure security for each wireless network that is enabled.
™
Configure Settings for
 - Use the pull-down menu to select the wireless network (SSID) that you wish to configure. Please note that wireless 
networks are enabled in the Multiple SSID page (see page 24).
™
Privacy
 - Choose one of the privacy settings listed below. The options available on the page will change depending on your choice.
Š
OFF -No Privacy (default) - The wireless network is open (no security) allowing any device to connect and access the network.
Š
WEP-Manual - Use the options below to configure a wireless network to use Wired Equivalent Privacy.
Key Length - Use the pull-down menu to choose 10 characters (40/64 bits) or 26 characters (128 bits). Use 128 bits if all of your wireless 
devices support it.
Key - Enter a WEP key that matches the character length you chose using a combination of numbers from 0-9 and letters from a-f. For example, 
"c8335fde7742a467bc85df2fc8" is a valid 26 character key. You must enter the assigned key for each new device that is added to the network.
Š
WPA-PSK - This is the preferred security method. Use the options below to configure your wireless network to use Wi-Fi Protected 
Access-Pre-Shared Key.
Passphrase - The passphrase can be between 8 and 63 characters. For best security it should be at least 20 characters. You must enter the 
assigned passphrase for each new device that is added to the network.
WPA Version - Enter WPA-1, WPA-2, or Both. Use WPA-2 if all of your devices support it or Both if you have older devices that only support 
WPA-1.
™
Hide SSID
 - Choose this option to turn off SSID broadcasting for a wireless network. You will no longer see the network broadcasted but you 
will still be able to connect to it.
™
Block Wireless Bridging
 - Select the check box to block wireless clients on this SSID from communicating with other wireless clients on the 
LAN side of the 2247-N8 regardless of SSID. Wireless clients will still be able to communicate with the 2247-N8 and to wired (Ethernet-con-
nected) interfaces connected to the 2247-N8.