Nortel Networks 2700 Manual De Usuario
62
Chapter 4 Installing option cards and DIMMs
NN46110-311 02.01
The first several times that you remove the front bezel, the bezel can stick
because the ball studs and socket clips are new.
because the ball studs and socket clips are new.
To remove the top cover:
1
If the gateway is in an equipment rack, remove it from the rack.
a
At the front of the chassis, remove the two panhead screws that secure the
bottom of the chassis to the equipment rack.
bottom of the chassis to the equipment rack.
b
Remove the VPN Router 2700 from the rack-mount shelf, and set it on a
sturdy surface.
sturdy surface.
2
Use a Phillips screwdriver to remove the four screws that secure the cover to
the chassis
the chassis
Figure 21
Removing the top cover
3
Slide the top cover forward approximately 1/4 inch.
CS260006A
Remove these 4 screws
Slide cover forward and lift up
Boot/Ready
Alert
Alert
Boot/Ready