3com WL-575 Manual De Usuario
6-86
C
HAPTER
6: C
OMMAND
L
INE
I
NTERFACE
Default
Disabled
Command Mode
Global Configuration
Example
filter ethernet-type enable
This command checks the Ethernet type on all incoming and outgoing Ethernet
packets against the protocol filtering table. Use the no form to disable this
feature.
This command checks the Ethernet type on all incoming and outgoing Ethernet
packets against the protocol filtering table. Use the no form to disable this
feature.
Syntax
[no] filter ethernet-type enable
Default
Disabled
Command Mode
Global Configuration
Command Usage
This command is used in conjunction with the filter ethernet-type
protocol command to determine which Ethernet protocol types are to be
filtered.
protocol command to determine which Ethernet protocol types are to be
filtered.
Example
Related Commands
Outdoor 11a Building to Building (config)#filter uplink add
00-12-34-56-78-9a
Outdoor 11a Building to Building (config)#
Outdoor 11a Building to Building (config)#filter ethernet-type enable
Outdoor 11a Building to Building (config)#