3com WL-575 Manual De Usuario

Descargar
Página de 293
6-105
Using the Command Line Interface
Syntax
show bridge stp
Command Mode
Exec
Example
Ethernet Interface Commands 
The commands described in this section configure connection parameters for the 
Ethernet port and wireless interface.
Table 24   Ehternet Interface Commands
Outdoor 11a Building to Building#show bridge stp
Bridge MAC           : 00:12:CF:05:B7:84
Status               : Disabled
priority             : 0
designated-root     : priority = 0, MAC = 00:00:00:00:00:00
root-path-cost       : 0
root-Port-no         : 0
Hold Time            :     1 Seconds
Hello Time           :     2 Seconds
Maximum Age          :    20 Seconds
Forward Delay        :    15 Seconds
bridge Hello Time    :     2 Seconds
bridge Maximum Age   :    20 Seconds
bridge Forward Delay :    15 Seconds
time-since-top-change: 89185 Seconds
topology-change-count: 0
Outdoor 11a Building to Building#
Command
Function
Mode
Page
interface ethernet
Enters Ethernet interface configuration mode 
GC
dns primary- server
Specifies the primary name server
IC-E
dns secondary- server
Specifies the secondary name server
IC-E
ip address 
Sets the IP address for the Ethernet interface
IC-E
ip dhcp
Submits a DHCP request for an IP address
IC-E
speed-duplex 
Configures speed and duplex operation on the 
Ethernet interface
IC-E
shutdown
Disables the Ethernet interface
IC-E
show interface ethernet
Shows the status for the Ethernet interface
Exec