3com WL-575 Manual De Usuario
6-112
C
HAPTER
6: C
OMMAND
L
INE
I
NTERFACE
interface wireless
This command enters wireless interface configuration mode.
This command enters wireless interface configuration mode.
Syntax
interface wireless <a | g>
• a - 802.11a radio interface.
• g - 802.11g radio interface.
• g - 802.11g radio interface.
Default Setting
None
Command Mode
Global Configuration
Example
To specify the 802.11a interface, enter the following command:
ssid
Configures the service set identifier
IC-W-VAP
closed system
Opens access to clients without a pre-configured
SSID
SSID
IC-W-VAP
max-association
Configures the maximum number of clients that can
be associated with the access point at the same time
be associated with the access point at the same time
IC-W-VAP
assoc- timeout-interval
Configures the idle time interval (when no frames are
sent) after which a client is disassociated from the
VAP interface
sent) after which a client is disassociated from the
VAP interface
IC-W-VAP
auth- timeout-value
Configures the time interval after which clients must
be re-authenticated
be re-authenticated
IC-W-VAP
shutdown
Disables the wireless interface
IC-W-VAP
show interface wireless
Shows the status for the wireless interface
Exec
show station
Shows the wireless clients associated with the access
point
point
Exec
Outdoor 11a Building to Building (config)#interface wireless a
Outdoor 11a Building to Building (if-wireless a)#
Command
Function
Mode
Page