3com WL-575 Manual De Usuario
6-139
Using the Command Line Interface
show rogue-ap
This command displays the current rogue AP database.
This command displays the current rogue AP database.
Command Mode
Exec
Example
Wireless Security Commands
The commands described in this section configure parameters for wireless security
on the 802.11a and 802.11g interfaces.
on the 802.11a and 802.11g interfaces.
Table 27 Wireless Security Commands
Outdoor 11a Building to Building #show rogue-ap
802.11a Channel : Rogue AP Status
AP Address(BSSID) SSID Channel(MHz) RSSI Type Privacy RSN
======================================================================
802.11g Channel : Rogue AP Status
AP Address(BSSID) SSID Channel(MHz) RSSI Type Privacy RSN
======================================================================
00-04-e2-2a-37-23 WLAN1AP 11(2462 MHz) 17 ESS 0 0
00-04-e2-2a-37-3d ANY 7(2442 MHz) 42 ESS 0 0
00-04-e2-2a-37-49 WLAN1AP 9(2452 MHz) 42 ESS 0 0
00-90-d1-08-9d-a7 WLAN1AP 1(2412 MHz) 12 ESS 0 0
00-30-f1-fb-31-f4 WLAN 6(2437 MHz) 16 ESS 0 0
Outdoor 11a Building to Building #
Command
Function
Mode
Page
auth
Defines the 802.11 authentication type allowed by
the access point
the access point
IC-W-VAP
encryption
Defines whether or not WEP encryption is used to
provide privacy for wireless communications
provide privacy for wireless communications
IC-W-VAP
key
Sets the keys used for WEP encryption
IC-W
transmit-key
Sets the index of the key to be used for encrypting
data frames sent between the access point and
wireless clients
data frames sent between the access point and
wireless clients
IC-W-VAP
cipher-suite
Selects an encryption method for the global key used
for multicast and broadcast traffic
for multicast and broadcast traffic
IC-W-VAP
mic_mode
Specifies how to calculate the Message Integrity
Check (MIC)
Check (MIC)
IC-W
wpa-pre-shared- key
Defines a WPA preshared-key value
IC-W-VAP