3com WL-575 Manual De Usuario
6-152
C
HAPTER
6: C
OMMAND
L
INE
I
NTERFACE
Example
link-integrity ping-fail-retry
This command configures the number of consecutive failed Ping counts before
the link is determined as lost.
This command configures the number of consecutive failed Ping counts before
the link is determined as lost.
Syntax
link-integrity ping-fail-retry <counts>
counts - The number of failed Ping counts before the link is determined
as lost. (Range: 1 - 10)
as lost. (Range: 1 - 10)
Default Setting
6
Command Mode
Global Configuration
Example
link-integrity ethernet-detect
This command enables an integrity check to determine whether or not the access
point is connected to the wired Ethernet.
This command enables an integrity check to determine whether or not the access
point is connected to the wired Ethernet.
Outdoor 11a Building to Building (config)#link-integrity ping-interval 20
Outdoor 11a Building to Building (config)#
Outdoor 11a Building to Building (config)#link-integrity ping-fail-retry 10
Outdoor 11a Building to Building (config)#