3com WL-575 Manual De Usuario
5-25
Administration
Telnet Server Status: Enables or disables the Telnet server. (Default: Enabled)
SSH Server Status: Enables or disables the SSH server. (Default: Enabled)
SSH Server Port: Sets the UDP port for the SSH server. (Range: 1-65535;
Default: 22)
Default: 22)
U
PGRADING
F
IRMWARE
You can upgrade new access point software from a local file on the management
workstation, or from an TFTP server. New software may be provided periodically
from your distributor.
workstation, or from an TFTP server. New software may be provided periodically
from your distributor.
After upgrading new software, you must reboot the access point to implement
the new code. Until a reboot occurs, the access point will continue to run the
software it was using before the upgrade started. Also note that new software
that is incompatible with the current configuration automatically restores the
access point to the factory default settings when first activated after a reboot.
the new code. Until a reboot occurs, the access point will continue to run the
software it was using before the upgrade started. Also note that new software
that is incompatible with the current configuration automatically restores the
access point to the factory default settings when first activated after a reboot.