3com WL-575 Manual De Usuario
5-39
Radio Interface
Closed System – When enabled, the VAP interface does not include its SSID in
beacon messages. Nor does it respond to probe requests from clients that do not
include a fixed SSID. (Default: Disable)
beacon messages. Nor does it respond to probe requests from clients that do not
include a fixed SSID. (Default: Disable)
Maximum Associations – This command configures the maximum number of
clients that can be associated with the access point at the same time.
clients that can be associated with the access point at the same time.
Authentication Timeout Interval – The time within which the client should finish
authentication before authentication times out. (Range: 5-60 minutes; Default:
60 minutes)
authentication before authentication times out. (Range: 5-60 minutes; Default:
60 minutes)
Association Timeout Interval – The idle time interval (when no frames are sent)
after which a client is disassociated from the VAP interface. (Range: 5-60 minutes;
Default: 30 minutes)
after which a client is disassociated from the VAP interface. (Range: 5-60 minutes;
Default: 30 minutes)
C
ONFIGURING
C
OMMON
R
ADIO
S
ETTINGS
To configure common radio settings, select the Radio Settings page, and scroll
down to below the VAP radio settings.
down to below the VAP radio settings.
Figure 31 Radio Settings A and B/G
Country Code – The current country code setting. This setting restricts operation
of the access point to radio channels and transmit power levels permitted for
wireless networks in the specified country.
of the access point to radio channels and transmit power levels permitted for
wireless networks in the specified country.