3com OfficeConnect Remote 812 Manual De Usuario
B-8
A
PPENDIX
B: CLI C
OMMAND
D
ESCRIPTION
close_active_connections [TRUE | FALSE]
This configures a network listener process that provides a certain type of service.
To see the available server types, use list services.
The table below shows configurable parameters for TELNET services, which are
specified with the data parameter.
specified with the data parameter.
Add network service example
To configure a TELNET service to offer CLI access on port 23, doing authentication
upon connect:
upon connect:
add network_service CLI_access server_type TELNETD socket 23
add snmp community
<community_name>
address [ip_address]
access [RO | RW]
Parameter
Description
<service_name>
Name of this type of service. Limit of 32 character ASCII string.
server_type
Designates the type of server:
HTTP
SNMPD - SNMP agent
TFTPD - server for file transfers
TELNETD - TELNET server to the CLI
socket
Indicates which “socket” the server listens on. For TFTP and TELNET, it is the
TCP or UDP port #.
TCP or UDP port #.
enabled
This indicates whether the network service is enabled. Enter YES or NO.
data
Ancillary Data. This field contains server-specific configuration data. See the
table on the next page for settable ancillary data parameters for TELNET.
table on the next page for settable ancillary data parameters for TELNET.
close_active_
connections
Indicates whether or not to close any active connections when a service is
disabled by the disable network_service command. Default: FALSE.
disabled by the disable network_service command. Default: FALSE.
Ancillary Data
Parameter
Parameter
Description
auth
On indicates that login/password authentication should be performed on
incoming connections.
Default: on.
incoming connections.
Default: on.
Format: auth=[on/off]
login_prompt
ASCII string specifying the login prompt to be sent during authentication.
It must be quoted.
Default: “login: “
It must be quoted.
Default: “login: “
Format: login_prompt=[string]
login_banner
ASCII string sent to a client when the connection is made. It must be
quoted. Default: none.
quoted. Default: none.
Format: login_banner=[string]