3com OfficeConnect Remote 812 Manual De Usuario
B-34
A
PPENDIX
B: CLI C
OMMAND
D
ESCRIPTION
set system
name [“name”]
location [“location”]
contact [“contact info”]
transmit_authentication_name [name]
Specifies system contact information, which is displayed using show system. The
user name is the remote account name. Location, name and contact names are
limited to 64 characters.
user name is the remote account name. Location, name and contact names are
limited to 64 characters.
set syslog <ip_address>
loglevel [level]
Sets the error reporting level for syslog entries that will be sent to the specified IP
address. You must have previously defined this syslog IP address using add syslog.
There are five levels of logging:
address. You must have previously defined this syslog IP address using add syslog.
There are five levels of logging:
CRITICAL - a serious system error, which may effect system integrity
UNUSUAL - an abnormal event, which the system should recover from
COMMON - a regularly occurring event that is not frequent
VERBOSE - a regular periodic event, e.g. a routing update message
DEBUG - for debugging only
set time <time>
Sets the system time, and leaves the date unchanged. Use show date to see what
the current settings are. The format is: hh:mm:ss. The seconds field is optional.
the current settings are. The format is: hh:mm:ss. The seconds field is optional.
set tunnel
<tunnel_name>
Modifies tunnel parameters.
The following is a list of set tunnel parameters and supported values:
Parameter
Description
name
A name identifying the user to the system.
location
The location of the user.
contact
The information contact for the user.
transmit_
authentication_name
authentication_name
Deprecated
Table 6-7 812 Set Tunnel Parameters and Supported Values
Parameter
Supported Value
Remarks
ENCRYPTION_ALGORYTHM
NONE
MTU
1400
TUNNEL_TYPE
PPTP, L2TP
PPTP is the default.
INPUT_FILTER
<filter_name>
OUTPUT_FILTER
<filter_name>
PASSWORD
<password>