3com OfficeConnect Remote 812 Manual De Usuario

Descargar
Página de 170
B-46
A
PPENDIX
 B: CLI C
OMMAND
 D
ESCRIPTION
Echos - sum of ICMP Echo (request) messages sent
Echo Replies - sum of these messages sent
Timestamps - sum of these messages sent
Timestamp Replies - sum of these messages sent
Address Masks - sum of these messages sent
Address Mask Replies - sum of these messages sent
show interface
<interface_name>
counters
Displays counters for the specified interface.
INPUT COUNTERS
Octets - bytes received
Ucast - Unicast packets received
MultiCast - Multicast packets received
BroadCast - broadcast packets received
Discards - Number of inbound packets which were chosen to be discarded 
even though no errors had been detected to prevent their being deliverable 
to a higher-layer protocol. One possible reason for discarding such a packet 
could be to free up buffer space.
Errors - For packet-oriented interfaces, the number of inbound packets that 
contained errors preventing them from being deliverable to a higher-layer 
protocol. For character-oriented or fixed-length interfaces, the number of 
inbound transmission units that contained errors preventing them from 
being deliverable to a number of inbound transmission units that contained 
higher-layer protocol.
Unknown Prot - unknown protocol in packet
OUTPUT COUNTERS
Octets - bytes transmitted
Ucast - unicast packets transmitted
MultiCast - multicast packets transmitted
Discards - Number of outbound packets which were chosen to be 
discarded even though no errors had been detected to prevent their being 
transmitted. One possible reason for discarding such a packet could be to 
free up buffer space.
Errors - For packet-oriented interfaces, the number of outbound packets 
that could not be transmitted because of errors. For character-oriented or 
fixed-length interfaces, the number of outbound transmission units that 
could not be transmitted because of errors.
Out QLen - length of the output packet queue (in packets)
show interface
<interface_name>
settings
Displays settings for the specified interface. The settings displayed depend on the 
interface you specify, and so will not be shown here.