3com OfficeConnect Remote 812 Manual De Usuario
show user <name>
settings
Displays the parameters defined for the specified TELNET user. You can use list
users to see which users are defined.
users to see which users are defined.
show vc <vc_name>
settings
Displays the parameters defined for the specified VC. You can use list vc to see
which virtual channels are defined.
which virtual channels are defined.
TELNET
TELNET commands are available to users who dial in, and whose type is network
(type parameter in add user), whose host_type is prompt (host_type parameter in
set login user), and whose login_service is TELNET (login_service parameter in set
login user).
(type parameter in add user), whose host_type is prompt (host_type parameter in
set login user), and whose login_service is TELNET (login_service parameter in set
login user).
telnet
<ip_name_or_addr>
Establishes a TELNET client session with the specified IP host name or address. In
order for the system to resolve the host name, you must either add the host name
and address to the DNS local host table, or define a DNS server.
order for the system to resolve the host name, you must either add the host name
and address to the DNS local host table, or define a DNS server.
telnet
<ip_name_or_addr>
TCP_port <number>
TCP_port <number>
Establishes a TELNET client session with the specified IP host name or address
using the specified TCP port number. It works just like the TELNET command,
except you also specify the TCP port number to be used. The default TCP port
number is 23.
using the specified TCP port number. It works just like the TELNET command,
except you also specify the TCP port number to be used. The default TCP port
number is 23.
VERIFY
verify filter
<filter_name>
Verifies the syntax of a filter file, which has been previously added to the table. If
you update a filter file and TFTP it to the FLASH file system, and the file already
exists in the filter table, then you use this command to verify the files syntax. You
can use list filters to see which files are currently in the filter file table, and what
the status of each is.
you update a filter file and TFTP it to the FLASH file system, and the file already
exists in the filter table, then you use this command to verify the files syntax. You
can use list filters to see which files are currently in the filter file table, and what
the status of each is.
TELNET
Commands
The following commands are available to TELNET users. They are accessed by
pressing control - ].
pressing control - ].
close
Closes the active TELNET connection.
help
Lists the available commands
send <string>
Transmits a TELNET control character. Be sure the parameters are uppercase. The
choices are:
choices are:
Parameter
Description
AYT
Are you there
IP
Interrupt process
BRK
Break
AO
abort output
EC
erase character
EL
erase line
GA
go ahead
NOP
no - operation