X-Micro Tech. WLAN 11g Manual De Usuario
15
4.2.1.11. Optional. If you select Specify an IP Address, type the
WAN IP Address, Subnet Mask, ISP Gateway Address and DNS
in the boxes, seen in FIGURE 4-3. You can collect such
information from your ISP.
WAN IP Address, Subnet Mask, ISP Gateway Address and DNS
in the boxes, seen in FIGURE 4-3. You can collect such
information from your ISP.
FIGURE 4-3: WAN IP Address - Specify an IP Address
4.2.1.12. If your ISP uses PPPoE (Point to Point Protocol over
Ethernet), click Enable next to PPPoE Login; otherwise, click
Disable. For detailed instructions on how to set the PPPoE
Login parameters in FIGURE 3-4, see To Set PPPoE Login
Parameters below.
Ethernet), click Enable next to PPPoE Login; otherwise, click
Disable. For detailed instructions on how to set the PPPoE
Login parameters in FIGURE 3-4, see To Set PPPoE Login
Parameters below.
4.2.113. If you want to use UPNP (Universal Plug and Play) to
plug devices like PCs, routers and others into a network and to
automatically know about each other, click Enable next to UPNP;
otherwise, click Disable.
plug devices like PCs, routers and others into a network and to
automatically know about each other, click Enable next to UPNP;
otherwise, click Disable.
4.2.1.14. When you have completed all the settings, click Apply,
or click Cancel to undo your changes.
or click Cancel to undo your changes.
Note :
If you choose to obtain an IP Address automatically, skip Step 11.
If you choose to obtain an IP Address automatically, skip Step 11.
Notes :
Using PPPoE, your ISP can authenticate your connection with a specific
user name and password for security issues.
If you enable PPPoE, make sure to uninstall all existing applications on
any computer in your network
user name and password for security issues.
If you enable PPPoE, make sure to uninstall all existing applications on
any computer in your network
.