3com SuperStack 3 NBX Manual De Usuario

You can modify the IP settings for a T1 Digital Line Card to meet 
changing requirements. The board must be on the same subnetwork as 
the Call Processor to modify IP settings.

To modify the IP settings of a T1 Digital Line Card:

1 On the Digital Line Cards tab, select T1/ISDN Board List from the Select 

Device Type drop-down list and click Apply.

2 Select the board for which you want to change the IP settings and click IP 

Settings.

3 To assign IP addresses automatically, enter the first address in the First 

IP Address field. The system sequentially adds the remaining addresses.

To assign IP addresses one at a time:

1 In the Digital Line Card IP Settings dialog box, click Assign Addresses 

Individually.

2 Enter the IP addresses that you want for the channels. You must have IP 

licenses installed before you can enter addresses.

3 Enter the mask number appropriate for your site in the Common Subnet 

Mask field.

4 Enter IP address for the Common Default Gateway, and then click Apply 

and OK.

5 In the Digital Line Card IP Settings dialog box dialog box, click Apply to 

effect the changes.

You can remove a T1 Digital Line Card at any time.

To remove a Digital Line Card:

1 On the Digital Line Cards tab, select T1/ISDN Board List from the Select 

Device Type drop-down list and click Apply.

2 From the list, select the Digital Line Card you want to remove.

3 Click Remove. A dialog box prompts you to confirm the removal.

4 Click Yes.