3com 10014302 Manual De Usuario

isdn spid1 spid 

undo isdn spid1 

ISDN BRI Interface view 

spid: String comprising 9 to 20 digits. 

Using the isdn spid1 command, you can configure SPID information for the B1 

channel on an NI-compliant BRI interface. Using the undo isdn spid1 command, you 

can remove the SPID information form the B1 channel on the interface. 

On a BRI interface compliant with the ISDN protocol in North America, calls can be 

placed only after the SPID negotiation or initialization is finished. SPID information 

can be obtained via static configuration or dynamic negotiation. Only after SPID 

information is configured for the B1 channel on the BRI interface can the system 

make the L3 initialization to place calls. 

By default, SPID for the B1 channel on a BRI interface is null. 

This command applies only on NI-compliant BRI interfaces. 

Set SPID to “012345” for the B1 channel on the interface bri0. 

[3Com-bri0] isdn spid1 012345

 

isdn spid2 spid 

undo isdn spid2 

3Com Router Command Reference Guide Addendum for V1.2

100