3com 10014302 Manual De Usuario

root delay 

Total roundtrip delay to the master reference source 

root disper 

The maximum error (dispersion) relative to the master reference 
source 

peer disper 

The dispersion of the remote NTP server 

 

display ntp-service trace [ X.X.X.X ]

All views

 

X.X.X.X: IP address of the NTP server operating as the reference clock source.

 

Using the display ntp-service trace command, you can display the brief information 

of the NTP time servers passed for tracing back to the reference clock source from 

the local device.

 

This command enables you to set out from the local device, trace along the time 

synchronization NTP server link back to the reference clock source, and display the 

brief information of all the NTP servers along the link. 

Display the brief information of the NTP time servers passed by when tracing from the 

local device to the reference clock source.

 

[3Com] display ntp-service trace

 

server4: stratum 4, offset 0.0019529, synch distance 0.144135 

server3: stratum 3, offset 0.0124263, synch distance 0.115784 

server2: stratum 2, offset 0.0019298, synch distance 0.011993 

server1: stratum 1, offset 0.0019298, synch distance 0.011993 refid  'GPS 

Reciever' 

The information shows the synchronization link of server4, along which, server4 

synchronizes with server3, server3 with server2, server2 with server1, and server1 

with the clock source GRP Reciever.

3Com Router Command Reference Guide Addendum for V1.2

70